View XN2_4553870.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Easy-wire connectors for Industrial Components
XN2
Easy-wire Connectors with * Specifications; Ideal for Connecting Sensors.
* Uses industry-proven spring clamps for wiring. * No special tools required for easy wiring. * Easy to rewire and repair * Each Connector accepts any wire size from AWG28 (0.08 mm2) to AWG20 (0.5 mm2). (External sheath diameter: 1.5 mm max.) * RoHS Compliant
*E-con specifications are currently being promoted for standardization by manufacturers of FA components and connectors.
Wiring Configuration Example
Connecting to FA Components
XN2A
* FA components with industrystandard sensor connectors
Sensor with prewired cable
Linking cables
XN2A
* Original Controller PCBs
XN2D
* FA components that connect via terminal blocks
XN2A
XN2B
Ordering Information
Type Appearance Cable Plug Connector Cable Socket Connector Single-socket PCB Socket Connector Four-socket PCB Socket Connector
No. of contacts 3 4 5 6 8
Model XN2A-1370 XN2A-1470 XN2A-1570 XN2A-1670 XN2A-1870
Model --XN2B-1470 -------
Model XN2D-1371 XN2D-1471 XN2D-1571 XN2D-1671 XN2D-1871
Model --XN2D-4471 -------
Easy-wire connectors for Industrial Components
XN2
181
Ratings and Specifications
Rated current 3 A/pole, using AWG20 (0.5 mm2) wire 2 A/pole, using AWG22 (0.3 mm2) wire 1 A/pole, using AWG24 (0.2 mm2) wire 0.5 A/pole, using AWG26 (0.1 mm2)or AWG28 (0.08 mm2) wire 32 VDC 30 m max. (20 mVDC max., 100 mA max.) 1,000 M min. (at 500 VDC) 1,000 VAC for 60 s (leakage current: 1 mA max.) 50 times Operating: -30C to 75C 0.08 mm2 (AWG28) to 0.5mm2 (AWG20) The external diameter of the cable sheath is 1.5 mm max.
Rated voltage Contact resistance (See note 1.) Insulation resistance Dielectric strength Insertion tolerance Ambient temperature (See note 2.) Applicable wires (See note 3.)
Note: 1. This value is the contact resistance of the connector. 2. The temperature is limited, however, to the maximum operating temperature for the cables. 3. Avoid using wires with a single strand diameter of 0.16 mm or smaller.
Materials and Finish
Item Housing Cover Base Lever Contact Cable Types Black PBT resin (UL94V-0) Black PBT resin (UL94V-0) Transparent PC resin (UL94V-0) PA resin (UL94V-0)/natural (white) Phosphor bronze/Underplating: Nickel (1.5 to 3.0 m) Contacts: Gold (0.2 m min.) Terminals: Tin plating (1.0 m min.) Stainless steel ----Copper alloy/nickel base with tin plating ------PCB Types
Spring Fastening pins
Dimensions (Unit: mm)
Cable Plug Connector
XN2A-1@70
18 3.3 17.6
1.2 dia. (internal) 1.65 dia. (external)
Dimensions
Dimension (mm)
1.1
C A B
A
B
C
No. of contacts 3 4.0 6.0 8.0 10.0 14.0 7.2 9.2 11.2 13.2 17.2 13.8 15.8 17.8 19.8 23.8 4 5 6 8
2 (pitch)
3.4 5.05 6
1.05 1.65
7.5 (Strip gauge)
182
Easy-wire connectors for Industrial Components
XN2
Cable Socket Connector
XN2B-1470
23.2 12.3
6
15.8 8.9 6.75 2 (pitch)
12.85
3.1
6.4
6
Single-socket PCB Socket Connector
XN2D-1@71
5.2 3.1 4-C1 B A CD E
6.4
Exterior of Single-socket PCB Connector
3.3
Applicable PCB Dimensions (Top View)
D C
t=1.60.2
20.05 (pitch)
1-0.10 dia.
+0.05
B E
6.4 0.2
2 (pitch)
Dimensions
Dimension (mm) No. of contacts A B C D E
13
3 4 5 6 8
6.9 8.9 10.9 12.9 16.9
5.8 6.8 7.8 8.8 10.8
4.0 6.0 8.0 10.0 14.0
8.0 10.0 12.0 14.0 18.0
13.8 15.8 17.8 19.8 23.8
Four-socket PCB Socket Connector
XN2D-4471
3.3
6.75 1 15.8 6
3.1
8.9
0.2
2 (pitch)
Applicable PCB Dimensions (Top View)
6.50.05 (pitch) 20.05 (pitch) 19.50.1
1-0.10 dia.
+0.05
t=1.60.2
6.75
6.5 (pitch)
25.9 19.5
60.1
9.05 10.05 3.2
Exterior of Four-socket PCB Connector
3.2
13
Easy-wire connectors for Industrial Components
XN2
183
Assembly Instructions
Preparing the Cable
Align the cable with the guide marked STRIP GAUGE on the side of the Connector, strip 7 to 8 mm of the cable sheath, and then twist the wires several times. 4. Make sure that the following operations have been performed. * Check that the operating lever is reset. * Check that the procedure in step 2 has been followed. (Pull gently on the cable to make sure that there is resistance, indicating that the Connectors are wired correctly.)
7 to 8 mm
Connecting the Cable to the Connector
1. Use a flat-blade screwdriver to push down the operating lever inside the operation slot until it locks.
Flat-blade screwdriver
Operation slot
2. Insert the wire fully to the back of the wire insertion hole. Make sure that the cable sheath is inserted into the hole, and that the end of the wire has passed through the contact section.
Contact section Cable sheath Wire insertion hole
Removing Cables from the Connector
1. Press down on the operating lever to lock the lever before removing the cable. 2. After removing the cable from the Connector, always reset the operating lever, except when rewiring the Connector. The Connector can be rewired without resetting the operating lever.
Operating lever (white)
3. Insert the screwdriver into the release slot, and gently pull back the lever until a click is heard by resetting the lever.
Operating lever (white)
Release slot
184
Easy-wire connectors for Industrial Components
XN2
Safety Precautions
General Precautions
* Do not pull on the Connectors or cables. Doing so may cause damage to the Connectors or cause the cables to disconnect. * Install the Connectors in a location where they will not be stepped on, to prevent disconnection of the cables or damage to the Connectors. If the Connectors have to be installed in such a location, use a protective cover. * Make sure that the Connectors are mated in the correct direction. Mating the Connectors incorrectly will damage to the Connectors. * Do not use the Connectors if the lock lever is bent or broken. Doing so may cause the Connector to become loose or the device to malfunction. * Before mounting Connectors to a PCB, make sure that the Connectors are positioned in the correct direction. * Before bending a cable to connect it to a Connector, check the bending specifications of the cable to be used. * Do not exceed the rated current of the cable. Always check the rated current of each cable to be used. * Do not use pliers or other tools to remove the Connectors. * Hold the Connectors firmly by hand when handling them. Do not use excessive force to push the Connectors. Forcing the Connectors may result in injury. * These Connectors do not resist water. Do not use Connectors in places where water or oil may be sprayed onto the Connectors.
Precautions for Correct Use
Wiring
* Insert one wire into each insertion hole. Inserting two or more wires into a single hole may cause unexpected problems. * Make sure that no power is being supplied to a Connector before wiring, inserting, or removing the Connector. Doing so may result in electric shock. * Follow the wiring diagrams for the device being used when wiring the cables. * Strip the cables according to the instructions in the applicable operation manual, making sure not to damage the wires. * Do not use a screwdriver with a tip larger than the specified width when wiring the Connectors. * Make sure short-circuits are not created, e.g., by protruding wires.
Inserting and Removing Connectors
* When connecting or disconnecting Connectors, always hold the case of the Connector. * When mating Connectors, insert the Connector fully into the back of the socket, and then make sure that the Connector will not become loose by lightly pulling it in the opposite direction.
Recommended Screwdriver
* Use a flat-blade screwdriver with a tip of 2 mm max. Do not use screwdrivers that gradually widen towards the base of the screwdriver. * Using other screwdrivers may cause damage to the adjacent poles.
Easy-wire connectors for Industrial Components
XN2
185
MEMO
186
Easy-wire connectors for Industrial Components
XN2
Omron Electronic Components, LLC
Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference.
(b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision.
Easy-wire connectors for Industrial Components
XN2
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information.
Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONIC COMPONENTS LLC
55 E. Commerce Drive, Suite B Schaumburg, IL 60173
OMRON ON-LINE
Global - http://www.omron.com USA - http://www.components.omron.com
847-882-2288
Cat. No. X304-E-1 01/10 Specifications subject to change without notice Printed in USA
Easy-wire connectors for Industrial Components
XN2

▲Up To Search▲

Price & Availability of XN2

	To Download XN2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .